The Flashforge Adventurer 5M Pro is a fully enclosed, high-speed FDM 3D printer with built-in air filtration — the enclosed and filtered version of the Adventurer 5M. At 499€ it delivers a complete package: 600 mm/s maximum speed, direct drive extruder, automatic levelling, dual-sided PEI plate, and an active HEPA + activated carbon dual filtration system inside a closed chamber. The enclosure makes it appropriate for printing ABS, ASA, and engineering materials that require thermal stability, and for environments (offices, classrooms, shared workspaces) where open-frame printing is not acceptable due to fumes or particles.

Key Specifications

Print technology	FDM / FFF — Cartesian
Build volume	220 × 220 × 220 mm
Max print speed	600 mm/s
Max acceleration	20,000 mm/s²
Max nozzle temperature	300°C
Max bed temperature	110°C
Extruder	Direct drive — quick-release nozzle
Bed levelling	Automatic
Build surface	Dual-sided PEI spring steel plate
Enclosure	Fully enclosed — with internal and external air circulation
Filtration	Dual filtration — HEPA + activated carbon
Connectivity	Wi-Fi, USB
Setup time	Under 10 minutes

Adventurer 5M Pro vs 5M — Which to Choose

The 5M and 5M Pro share the same CoreXY motion system, direct drive extruder, and 600 mm/s maximum speed. The differences are enclosure, filtration, and nozzle temperature ceiling. Choose the 5M Pro if you: print ABS, ASA, or any material that benefits from a warm chamber environment; work in an office, school, or shared space where VOCs and particles from open-frame printing are a concern; want the quick-release nozzle system for faster material and nozzle changes; or regularly print materials above 280°C. Choose the 5M if you: primarily print PLA and PETG in a ventilated workshop; want the lowest cost entry point; and have no enclosure requirement.

300°C Nozzle Temperature

The Pro's 300°C nozzle ceiling (vs 280°C on the standard 5M) opens up PA-12 Nylon and some PC Blend grades alongside the standard PLA/PETG/ABS range. Combined with the enclosed chamber, the 5M Pro is a capable machine for functional engineering materials at this price point.

Material Compatibility

• Standard: PLA, PETG, ABS, ASA — fully enclosed, good warping resistance
• Engineering: PA-12 Nylon, PC Blend (up to 300°C nozzle)
• Flexible: TPU
• Composite: PLA-CF, PETG-CF (hardened nozzle recommended)

Who It's For

• Designers and engineers who print ABS, ASA, or Nylon and need enclosure stability at an accessible price
• Offices, schools, and shared studios requiring filtered, enclosed printing
• High-volume users who want the 5M's speed with materials that require thermal control
• Makers who want a single machine covering the full standard-to-engineering material range

Available from Eolas Prints

Eolas Prints is an authorised Flashforge reseller based in Cantabria, Spain. EU warranty and support included.